Mechanical Ventilation with Heat Recovery (MVHR) works by recovering heat from extract air that would normally be expelled to the atmosphere and transfers this heat to fresh air being drawn into the property via a heat exchanger. The Heat Recovery Ventilation (HRV) system then distributes this throughout your property via a network of ducting.
The ducting is brought to each habitable room and each wet room within your property. Each wet room is fitted with an extract valve and each habitable room with a supply valve.
The Heat Recovery Ventilation system continually extracts from the wet rooms, boosting if necessary, removing the pollutant air quickly and effectively at its source. This air then passes up through the network of ducting and travels through a heat exchanger where its heat passes to the fresh filtered air which is being brought into the property at the same time.
AIRCYCLE 1.3 Digital Range
- Suitable for small to medium dwellings and apartments
- Up to 65 l/s @ 150 Pa max airflow
- Up to 92% heat recovery efficiency
- Down to 0.42 W/l/s specific fan power
- Remote digital control with status indication
- 4 Airflow modes (100% variable): Night, General, Boost, Purge
- Programmable 25%+ boost setting· Wall, ceiling and floor mount options
AIRCYCLE 3.1 Digital Range
- Suitable for medium to large dwellings and apartments
- Up to 100 l/s @ 150 Pa max airflow
- Up to 92% heat recovery efficiency
- Down to 0.42 W/l/s specific fan power
- Remote digital control with status indication
- 4 Airflow modes (100% variable): Night, General, Boost, Purge
- Programmable 25%+ boost setting
- Wall and floor mount options